Completed entirely online.
Who Should take this course?
This DOT Hazmat General Awareness/Function Specific course is an in-depth course for all employees involved in the transportation of hazardous materials. This training is a 10-hour course targeted for workers with the intention of meeting General Awareness training requirement as well as several Function-specific Training requirements in addition to the basic requirements met by our 4-hour DOT Hazmat Basic General Awareness course.
All workers employed in an industry that involves the transportation of hazardous materials must have DOT General Awareness training. This includes not just drivers and manufacturers, but anyone who manufactures, repairs, or reconditions containers used to transport hazardous materials.
The DOT Hazmat General Awareness/Function Specific training meets the requirements of DOT General Awareness training, and includes the following function-specific topics:
Additional function-specific training may be required to prepare you for the duties associated with your job.
This course can be taken as initial training or refresher training, and must be refreshed a minimum of every 3 years. If you are involved in transportation by air, the Federal Aviation Administration (FAA) requires refresher training every 2 years.
The objectives of this course are to meet the DOT training requirements of 49 CFR 172.704(a)(1) and 172.704(a)(4).
General awareness/familiarization training. Each hazmat employee shall be provided general awareness/familiarization training designed to provide familiarity with the requirements of this subchapter, and to enable the employee to recognize and identify hazardous materials consistent with the hazard communication standards of this subchapter.
Security awareness training. No later than the date of the first scheduled recurrent training after March 25, 2003, and in no case later than March 24, 2006, each hazmat employee must receive training that provides an awareness of security risks associated with hazardous materials transportation and methods designed to enhance transportation security. This training must also include a component covering how to recognize and respond to possible security threats. After March 25, 2003, new hazmat employees must receive the security awareness training required by this paragraph within 90 days after employment.
This course consists of 21 sections divided into 9 modules. Students are required to take each section in sequential order as listed below.
|Module #||Section #||Title|
|Module 1||1||Introduction to DOT Hazmat Training|
|2||How to Use the HMR|
|Module 1 Exam|
|6||Flammable and Combustible Liquids|
|8||Oxidizers and Organic Peroxides|
|12||Miscellaneous Hazardous Materials|
|13||Other Regulated Materials|
|Module 2 Exam|
|Module 3||14||What is the HMT?|
|16||Proper Shipping Names and Descriptions|
|17||Hazard Class or Division|
|18||ID Numbers and Packing Groups|
|19||Label Codes and Special Provisions|
|20||Packaging Requirements, Quantity Limitations, and Vessel Stowage|
|21||Appendices A and B|
|Module 3 Exam|
|Module 4||22||Shipping Papers|
|23||Completing Shipping Papers, Steps 1 - 3|
|24||Exemptions and Special Permits|
|25||Requirements by Mode of Transportation|
|26||Technical Names, Exceptions, and Additional Information|
|27||Hazardous Substances and Radioactive Materials|
|29||General Formatting and Emergency Response|
|Module 4 Exam|
|Module 5||30||General Marking Requirements|
|34||Markings by Hazmat Type|
|35||Markings by Bulk Packaging Type|
|Module 5 Exam|
|Module 6||36||General Labeling Requirements|
|37||Additional Labeling Requirements|
|38||Labels by Class|
|Module 6 Exam|
|Module 7||43||General Placarding Rules|
|46||Placarding Tables 1 and 2|
|47||Subsidiary Hazard Placarding|
|48||Mode of Transportation Placarding|
|Module 7 Exam|
|Module 8||49||General Packaging Requirements|
|52||Leaking or Damaged Packages, Hazardous Waste, and Overpacks|
|53||Department of Defense Packaging|
|Module 8 Exam|
|Module 9||54||Security Awareness|
|Module 9 Exam|
This course has one final exam based upon the course's 9 modules.
Students are required to complete the exam after completing each module.
The exam consists of 20 questions randomly selected from a large pool of questions. A 70% score or better is required to pass the exam.
If a student does not pass the exam the first time, they may retake the exam as many times as necessary in order to pass.
This course is designed to help workers meet the DOT's requirement for Security Awareness Training.
This training is part of a core curriculum of training that includes:
Workers must receive additional training, when required by DOT, OSHA, or EPA standards, on the specific hazards of their job.
Training providers should be used to ensure credibility and augment a company's training program. Therefore, in addition to the training provided by an outside party, a student should receive site-specific training that is supplied by their own company. This training should target the company's unique approach to hazard prevention, including the use of site-specific equipment, health and safety policies, and emergency procedures. As a rule, this company specific training should be well documented.
The bottom line in ALL SITUATIONS is that employers are required to ensure that their employees are adequately trained to do their job.
We're excited to announce that this course is now available in HTML 5, making it more compatible with the browser on your mobile device (e.g., smartphone or tablet). Many of our existing courses are presented using Adobe Flash Player and require additional software that may not be available on your mobile device. By comparison, this course requires only the most recent version of your mobile device's web browser.
Mobile versions of this sort of training are new, but below are some Pros and Cons that we have noticed during our extensive testing.
During our testing we really noticed that tablets work much better than smartphones, simply due to their screen size.
Because this is a Beta Version of our course, you may encounter some issues as we work out the kinks.
While HTML5 makes taking this course on mobile devices possible, not all mobile browsers are optimized for HTML5, meaning you may not have complete functionality. If you have difficulty taking this course using the browser on your mobile device, you may need to use a different browser.
Test the functionality of your browser using HTML5 and compare it to the performance of other browsers. If you find other browsers are more compatible than your own, you may want to make the switch.
Below are some frequently asked questions specific to this course.
Our courses are set up to take a specific amount of time. Some students may get through the training more quickly, while others may actually take longer to complete their training. Remember, this training should be used as an intricate tool in the context of an overall training program; it can be combined with other training throughout the year in order to meet any hour requirements needed.
No, our courses are designed so you can start and stop as needed, allowing you to break the training up over a longer period of time. Our system will keep track of your progress, enabling you to resume where you left off upon your next login. It is important that once you start a section, you complete that section or you will need to start that section over from the beginning upon your return.
Yes, you can take the online portion by signing in with your username and password from any location and computer with high-speed internet access. However, each computer does need to meet our basic system requirements for viewing our online courses.
Yes, once you have completed a course, you are able to download, save or print a certificate of completion from your student account. Certificates are created in a pdf format. Users must have the latest version of Adobe Acrobat Reader before attempting to download the completion certificate.